We specialize in high-performance DSP based real-time embedded controllers that accept serial communication commands to perform various functions for industrial measurements and automation. The typical applications include real-time monitoring & controls, industrial PID feedback controls, instrumentation, test & measurement, servo loop controls, multi-axis motion controls, vibration monitoring, inspections, acoustics, environmental detection, etc. The standard USB, RS232, RS485, and CAN serial communication are supported in RTMC series.  Being committed to the cutting-edge technologies, our products offer the best features for a lower cost than other competitors can. Some of these features include: 16-bit 40 MIPS DSP core processor, accepting modbus protocol and simple ascii command, USB to UART bridge, USB to CAN bridge, RS232 to CAN bridge, PID controllers, low-pass digital filter on A/D input, 16-bit PWM, sine and ramp function generators, and programmable sampling rate for PWM carrier frequency and PID control.    The RTMC series controllers are specially designed  for OEM products, system integration, product prototyping, Instrumentation, etc. Commanding the controller rather than programming the controller, it will greatly reduce your product development time and therefore lower your costs. RTMC200 Series Controllers - General Application 16 channel, 10 bits A/D with up to 30 ksps up to 4 channel, 12 bits D/A with up to 30 ksps 2 channel 32-bit counters 3 channel 16 bits PWM with up to 30 kHz carrier frequency 10 TTL compatible Inputs 9 TTL compatible outputs RS232, RS485, USB, or CAN  Support Simple ASCII and Modbus protocols 6.5 - 12 V DC daisy-chainable power supply                         For more details, check RTMC200 Series Products Starting from  $129.95   RTMC400 Series Controllers - Motion Control Application Speed PID controller + Position PID controller  2 channel stepper motor indexers up to 4 channel, 12 bits D/A with up to 30 ksps 16 channel, 10 bits A/D with up to 30 ksps 1 quadrature encoder + index input  Up to 3 channel 16 bits PWM with up to 30 kHz carrier frequency 7 TTL compatible Inputs 9 TTL compatible outputs RS232, RS485, USB or CAN  Support Simple ASCII and Modbus protocols 6.5 - 12 V DC daisy-chainable power supply                         For more details, check RTMC400 Series Products RTMC600 Series Controllers - PID Control & Automation 4 PID feedback controllers with control sampling rate up to 30 ksps  up to 4 channel, 12 bits D/A with up to 30 ksps 16 channel, 10 bits A/D with up to 30 ksps  2 32-bit counters  Up to 3 channel 16 bits PWM with up to 30 kHz carrier frequency 10 TTL compatible Inputs 9 TTL compatible outputs RS232, RS485, USB, or CAN  Support Simple ASCII and Modbus protocols 6.5 - 12 V DC daisy-chainable power supply                          For more details, check RTMC600 Series Products