RTMC600-232 Controller

RTMC600-232A  $169.50 User Manual

RTMC600-232B  $179.50 User Manual

RTMC600-232C  $174.50 User Manual

RTMC600-232  is a RS-232 interface based function-ready controller that  accepts either serial ASCII string commands or Modbus protocol to perform real-time tasks in the applications of monitoring, measuring, and controls. All commands are sent through RS-232 standard communication port.  It is based on a high-performance 16-bit and 40 MIPS DSP core processor with enhanced peripheral interface. The advanced embedded firmware has been developed and embedded into this controller so that the customer neither needs to develop real-time embedded firmware nor needs development tools. To command this device, the user simply sends simple ASCII strings or Modbus protocol  through RS232 serial port to do four PI controller feedback controls, to read A/D, to output D/A and PWM, to set I/O or read I/O, or to read event counters. You can choose to have the returning data in either ASCII format or binary format based on setup configuration. Each A/D input can be filtered or passed through as raw data. This controller is capable of automatically recognizing ASCII protocol and Modbus protocol. For more details, click here to download user manual for RTMC600 Series Controllers (PDF).

The ASCII string commands are intuitive and simple. For example, the command @1XR2 5000 will set the control reference2 for PI controller2 to 5000 for this controller at device address 1.  @1RAU3 will read the A/D channel 3 with raw data from this controller at device address 1. 

We offer three different board configurations to give you a flexibility to choose the one that fits your hardware interface. The RTMC600-232A has no 0.1" pin header connectors installed; the RTMC600-232B is fully populated with 0.1" headers and terminal blocks as shown in the above picture; the RTMC600-232C is specially to be used as a daughter board with all 0.1" pin header connectors installed for daughter board interface. All of the three different boards function the same as stated in RTMC600 series controllers' User Manual

 Features:

• 16-bit 40 MIPS DSP core controller.

• 4 PI controllers for industrial feedback control applications.

• 16 channels,10-bit A/D Sample & Hold with programmable sampling rate up to 30 kHz.

• 2  channels, 12-bit D/A with programmable sampling rate up to 30 kHz.

• 3 16-bit PWM outputs with programmable carrier frequency up to 30 kHz (symmetric waveform).

• 2 32-bit counters with up to 10 MHz input signal bandwidth.

• 10 Inputs digital I/O TTL compatible.

• 9 Outputs digital I/O TTL compatible.

• Digital filter on each A/D input.

• Built-in Watchdog capability.

• EEPROM for all configuration parameters.

• RS232 Communication.

• Support simple ASCII string commands.

• Support Modbus protocol.

• 6.5 -12 V DC power supply .

• Compact size: 3.75" x 2.5" (9.6 x 6.3 cm) .

Connectors:

• 0.1"  20-pin double row header for J1 (Analog Inputs Interface)
• 0.1"  5-pin single row header for J8 (Digital-to-Analog Interface)
• 0.1"  40-pin double row header for J2 (I/O Interface)
• 0.1"  3-pin single row header for J14 (Power Supply)
• DB9 RS-232 standard communication connector J10
• 0.1" 2-pin single header for K2 (Jump used for default communication set)